Dodge RAM Burnbox by Z-Automotive

Line Lock: Using two steering wheel buttons, the BurnBox RAM uses the ABS valves to hold the vehicle with the front brakes so you can hit the gas and do a perfect burnout as long as you wish, with no wear on the rear brakes. No plumbing required! This is a perfect alternative to the traditional plumbed-in solenoid type line lock/roll control. Super simple and cannot be detected! Gone are the days of plumbing in external solenoids in the brake system, having to bleed the brakes and run wires through the firewall to a switch.

Light Show: Using the keyfob or steering wheel buttons, turn on a light show that flashes the exterior lights in 9 different patterns.

Z Automotive Programming Utility (for Windows PCs only) is used for firmware updates and for configuration:

TPMS settings:  are you running tires that don’t have sensors or are at pressures that keep the TPMS system in alert?  Turn off the TPMS alerts in the EVIC screen. (This will not disable the amber tire symbol on the dash)

Tire Size Calibration:  Have you changed the tire size on your Ram? Easily change the tire size through the EVIC menu to re-calibrate the speedometer.

Gear Ratio calibration:  Have you changed gear ratios on your Ram?  Easily change your gear ratio through the EVIC menu to re-calibrate the speedometer.

Performance timers: 0 to 30 and 0 to 60  timers in the EVIC display!

INSTALLATION IS A SIMPLE MATTER OF PLUGGING IT INTO THE DIAGNOSTIC OBD2 PORT WHICH IS LOCATED ABOVE THE PARKING BRAKE.

2013 - 2017 Dodge Ram 6.4L HEMI