Use this brace to help relieve differential breaking stress loads under heavy throttle for your Hellcat or Demon.
Hellcat Challenger, Charger, and Demon rear differential braces. Shown here is all of the hardware and components needed to install your differential brace. All that is required for the 2015 and 2016 models are the two 8mm bolts without the nuts to bolt it to the crossmember.
The 2017 -2018 Hellcat Challenger, Charger, and Demon do not have nuts inside the crossmember so TBA has made an easily adaptable nut for you to slide through the rectangular slot to easily line up the 8mm provided hardware.
For the 2015 and 2016 Hellcat models just simply install the two 8mm hex nuts with a 5mm allen wrench and torque them to 20 foot pounds. The two new rear differential bolts require a 12mm allen wrench and need to be torqued to 90 foot pounds.
Hellcat/Demon Differential Brace by TBA Machine fits the following vehicle(s):
2015+ Dodge Challenger Hellcat
2015+ Dodge Charger Hellcat
2018 Dodge Demon
